Table of Contents
Advertisement
Appendix A: Browser-based Configuration Tool
All AC-powered sensors have a built-in web server that allows you to log into and configure the
device through a browser when attached directly to the computer via a network cable. With this
utility you can specify the address of the destination host and wired or wireless network parameters.
The utility also provides some tools for diagnosing problems. Opening the utility and using it to
configure AC-powered sensors are covered in Configure Sensors for the Network on page 25.
This section describes other actions that can be performed using the Browser-based Configuration
tool.
Action Buttons
These buttons act on the data entered on the browser-based Configuration Tool main window:
•
Submit Configuration Button
•
Micro Firmware Upload Button
•
Radio Firmware Upload Button
•
Site Survey Button
•
Change Password Button
•
Reset Device Config Button
•
Exit Config Mode Button
•
Test Configuration
Submit Configuration Button
Click the Submit Configuration button to accept your changes and store your settings in the
device's onboard memory.
Micro Firmware Upload Button
Clicking the Micro Firmware Upload button displays the Micro Firmware Upload page. You use
this page to upload a new version of the firmware to the microcontroller. For more information on
updating sensor device firmware, refer to the SNS Temperature and Humidity Sensors User Guide.
Radio Firmware Upload Button
Clicking the Radio Firmware Upload button displays the Radio Firmware Upload page. You use
this page to upload a new version of the firmware to the 802.11 wireless radio. For more information
on updating sensor device firmware, refer to the SNS Temperature and Humidity Sensors User
Guide.
Site Survey Button
Clicking the Site Survey button displays the Site Survey page. You use this page to view a list of all
wireless access points recognized by your device.
Primex Wireless, Inc.
SNS™ Temperature and Humidity Sensors Installation Guide
54
Advertisement
Table of Contents
