Table of Contents
Advertisement
Appendix B: Battery Sensor Configuration Utility
The SNS Sensor Configuration Utility configures and reads the settings in the SNS battery-powered
sensors. The SNS sensors supported are Single Temperature, Dual Temperature, and
Temperature and Humidity. With this utility you can specify the address of the destination host, the
wireless network parameters, transmit period of the sensor, and alarm information. The utility also
provides some tools for diagnosing problems. Using the utility to configure battery-powered sensors
is covered in Configure Battery-powered Sensors with the Sensor Configuration Utility on page 39.
This section covers the following topics:
•
Installing the Configuration Utility
•
User Interface
Installing the Configuration Utility
Before beginning, review the system requirements.
•
USB programming cable
•
Windows XP, 2000, 2003, Vista, or 7
•
A computer with a USB port
Installing the Primex Wireless SNS Sensor Configuration Utility
1. Install the program on your computer by double-clicking on the provided install file Setup.exe,
whose icon looks like
2. Wait for the Welcome to the InstallShield window to appear.
3. On the Welcome to the InstallShield window, click Next to continue. The next window details
release information for the Primex Wireless SNS Sensor Configuration.
4. Read through this release information, and click Next to continue. The Customer Information
window opens.
Primex Wireless, Inc.
Figure 28
.
Figure 28: Install Icon for the Battery Sensor Configuration Utility
SNS™ Temperature and Humidity Sensors Installation Guide
57
Advertisement
Table of Contents
