Safety Precautions
Read this document thoroughly before performing any installation or service procedures.
Safety Precautions
SNS sensors are designed for indoor use only and are not weather protected. Operating the
sensors outdoors, or in wet areas is an electrical hazard and may damage the temperature sensor
while nullifying the warranty.
Equipment Precautions
•
To avoid possible electric shock or damage to an SNS sensor, make sure that it is not powered
when mounting it.
•
For healthcare facilities, sensors are not intended for patient use and must not be installed
within 6ft (2m) of patient contact.
•
SNS sensors may be cleaned with a cloth moistened with water or a common disinfectant.
Be sure to test any cleaning solutions on a small area of the
sensor before using it on the entire sensor.
Primex Wireless, Inc.
SNS™ Temperature and Humidity Sensors Installation Guide
5