Answering Calls; Using The Speakerphone - Sanyo Sprint SCP-7000 Operating Manual

Answering Calls

1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail.
2. When your phone rings, press TALK or SPEAKER.
3. To disconnect the call, press END/ .
Your phone notifies you of incoming calls in the following ways:
The phone rings and/or vibrates.
The LED indicator flashes.
The backlight illuminates.
The screen displays an incoming call message.
The phone number of the caller is displayed, if available.
If the phone number is in your Contacts list, the Contacts entry's name is displayed.
The picture is displayed when you have set the downloaded picture to "Incoming Calls".
The following options are also displayed by pressing Options (right softkey). To select an
option, highlight it and press MENU/OK.
Call Guard to answer the call when you are in roaming mode. (This feature appears when
you are in digital area and analog service area.) See page 36 for setting Call Guard.
Answer to answer the call.
Answer:Speaker to answer the call in speakerphone mode.
Answer on Hold to put the call on hold.
Screen Call to answer the call by using pre-recorded announcement. (This feature appears
when you are in Service area or digital roaming area.) See page 54 or setting up.
Quiet Ringer to mute the ringer. (This feature appears when the ringer is set.)
To answer a call when you are roaming and Call Guard is enabled, you must press Options
(right softkey), select Answer or Answer:Speaker and press MENU/OK to answer the call. See
page 36 for setting Call Guard.
Note: When your phone is off, incoming calls go directly to voicemail.

Using the Speakerphone

The speakerphone feature lets you hear audio through the speaker and talk without holding
the phone. When the speakerphone is activated, use the Side Volume key to adjust the volume.
To turn the speakerphone on during a call:
Press SPEAKER.
-or-
Press Options (right softkey), select Speaker On.
To turn the speakerphone off during a call:
Press SPEAKER.
-or-
Press Options (right softkey), select Speaker Off.
13