Using Caller Id; Responding To Call Waiting - Sanyo Sprint SCP-7000 Operating Manual

Clearing the Message Icon
Your phone may temporarily continue to display the message icon after you have checked your
voice and text messages.
To clear the icon from the display screen:
1. Press MENU/OK to access the main menu.
2. Select Messaging and press MENU/OK.
3. Select Voicemail and press MENU/OK.
4. Select Clear Count and press MENU/OK.
5. Select Yes and press MENU/OK.

Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the
number of the incoming call. If you do not want your number displayed when you make a call,
just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1. Press * 6 7 .
2. Enter the number you want to call.
3. Press TALK or SPEAKER.
To permanently block your number, call PCS Customer center.

Responding to Call Waiting

Call Waiting alerts you to incoming calls while you're on a call by sounding one beep. Your
phone's screen informs you that another call is coming in and displays the caller's phone
number (if it is available and you are in digital mode).
To respond to an incoming call while you're on a call:
Press TALK (or press Options [right softkey], highlight Flash or Flash:Speaker and press
MENU/OK).
This puts the first caller on hold and answers the second call.
To switch back to the first caller:
Press TALK again (or press Options [right softkey], highlight Flash or Flash:Speaker and
press MENU/OK).
Tip: For those call where you don't want to be interrupted, you can temporarily disable Call
Waiting by pressing *
reactivated once you end the call.
7 0 before placing your call. Call Waiting is automatically
60