Installation - Idis DR-1308P Quick Manual

Installation

Prior to installing the software, click on to the Windows
Start menu, open Control Panel, click on Power
Management, and set options for Turn off monitor and
Turn off hard disks as Never.
1
Please enter the software installation CD into the PC.
2
Browse to the Setup folder in the CD and run setup.
exe.
On Microsoft
Account Control window may pop-up.
Click Allow and follow the instructions in
the installation window to proceed with the
installation.
3
When the installation window appears, click Next.
4
Select an installation path for the program, and click
Next.
5
When the install confirmation window appears, click
Next.
NET Framework and Visual C++ Runtime
Libraries will be installed automatically, and
it may take a few minutes. If NET Framework
and Visual C++ Runtime Libraries are already
installed on the system, this step will be
skipped automatically.
6
When the Installation Completed window appears,
click Close and finish the installation.
Start Program
When IDIS Center software is installed, IDIS Center and
IDIS Center Run as administrator shortcut icons will
be created on the desktop. Run IDIS Center software by
double-clicking on IDIS Center or IDIS Center Run as
administrator shortcut icon. If a removable eSATA HDD or
SD (SDHC) memory card are connected to the IDIS Center
system, you must double-click on IDIS Center Run as
administrator.
® ®
Windows Vista or User
Login
This program does not have a password set by default.
Leaving the admin account unassigned with a password
poses a security risk. Please assign a password at your
earliest convenience.
Once the program is running, you must login.
Enter a User ID and Password.
● Remember my ID on this computer: Remembers the ID
used to login.
● Restore last Live sessions: Restores the previous Live
session on the current Live panel.
• Default User ID is "admin" without a password.
• You can change User ID and Password in the User
menu.
Device Registration
To use the functions provided by IDIS Center, you must first
register a device and add the device to a device group.
1
Select System > IDIS Center Setup > Device in the
menu at the top of the screen.
2
On the Site panel, click on All Devices, then click on
the button at the bottom of the Site List panel on
the right. A Device Scan window will appear on the
screen.
E
13