How Do I Activate The Tamper Alarm On The Fr700 Clock - Lathem FaceIN FR700 User Manual

•
Press 1 for YYYY-MM-DD (2011-03-01) or 2 for MM-DD-
YYYY (03-02-2011). Note: March 01, 2011 was used in the
example above.
•
After a few seconds the system will return to the "Set Date
and Time" screen. Continue making changes to the clocks
system settings or press ESC, ESC and ESC again to return
to the normal time/date screen.
How do I activate the tamper alarm on the
FR700 clock?
The FR700 clock has a feature where if it were removed from the
wall mounting-plate an alarm can sound. The alarm is turned off by
default. (FR700 only)
•
At the FaceIN clock press the MENU key. Administrator
verification is required.
•
The administrator should present and position their face for a
facial scan. The Functions Menu will display upon a
successful verification.
•
Press 4 or select the System Setting menu and press OK.
•
Press 7 or select the Set Remove Alarm menu and press
OK.
•
Press 1 for Open. This will enable the alarm to sound if the
clock if removed from the mounting-plate.
•
Press 2 for Close. This will disable the alarm. If the clock is
removed from the mounting-plate the alarm will not sound.
•
After a few seconds the system will return to the "System
Setting" screen. Continue making changes to the clocks
system settings or press ESC and ESC again to return to the
normal time/date screen.
Appendix • 33