Enrolling Employee
Faces
The FaceIN clock utilizes an "embedded facial recognition" system.
This means that employees will punch in and out by presenting their
face in front of the clock's "Dual Sensors". The FaceIN clock verifies
the face image and records the punch. When you're ready you
simply poll the clock to add the punches to the database.
See Appendix A - Enrollment Guide for a detailed pictorial.
Guidelines
•
The FaceIN clock is for use indoors; do not position the clock
in direct sunlight.
•
Use normal facial expressions and avoid wearing
sunglasses.
•
If glasses or a hat is worn, please take the glasses and/or
hat off halfway through the enrollment process for better face
recognition.
Important Note: Some coatings on the lens of eye glasses will
prevent the FaceIN clock from recognizing the employee's face.
In this situation the eye glasses should be removed for
enrollment and when punching In/Out.
•
Bend into the camera, keeping the distance between the
face and screen at 9 to 25 inches for best results.
•
Keep the face centered between the 2 cameras.
•
If the green lined frame displays when the employees face is
successfully being detected.
•
If the white dashed frame appears, the employees face
cannot be recognized, so please have the employee adjust
their positioning.
FaceIN • 13