Appendix B - Access
Control
Access control is only available in the FR700 model. Use the
FR700's internal access control relay to integrate with a facilities
entry access control system.
Important Note: When enrolling an employee make sure to select
OK at the Permit Open Door? prompt.
Clock Access Control Relay
Connector Configuration
1 = D0 - Output to Wiegand Controller
2 = D1 - Output to Wiegand Controller
3 = Not Used
4 = NO - Normally open internal dry
contract relay output
5 = COM - Common output for internal
dry contract relay
28 • Appendix
6 = +12V - 12 volt output to external
device
7 = +12V - 12 volt output to external
device
8 = GND - Ground connection
9 = GND - Ground connection
10 = Not Used