How Do I Enroll An Employee; Verification Methods - Lathem FaceIN FR700 User Manual

How do I enroll an employee?

•
At the FaceIN clock press the MENU key. Administrator
verification is required.
•
The administrator should present and position themselves
for a facial scan. The Functions Menu will display upon a
successful verification. Note: The FaceIN clock requires
administrator verification in order to enroll employee faces.
•
Press 2 or select User Management and press OK, the User
Management menu will display.
•
Press 2 or select the Modify User menu and press OK.
•
Use the numeric keys to enter the user number and press
OK. The user number is the same as the PIN number that
was set up in the PayClock software.
•
The employee's first name will display. Press OK to
continue.
•
With the employee standing at the ready select the
verification method to use for the employee.

Verification Methods

Typically for a normal employee you would select Face recognition,
for a temporary employee select Card recognition, for higher security
select either Pin and Face or Card and Face recognition.
Face / Pin and Face Verification Method Selected
When enrolling employee faces take the following into consideration:
Eye Glasses - It is recommended for the employee to enroll with the
eye glasses on for half the process, then remove the eye glasses
and complete the registration.
Hair Style - If the employee has a hair style that has their hair
covering or blocking their eyes, move the hair away from the eyes
during the registration process.
•
Position the employee so the face is in the middle of the two
cameras with 9 to 25 inches between the face and the clock.
•
The image collecting screen will display, start the face
recognition enrollment.
•
Perform 2 small head circles to the right.
14 • FaceIN