Advertisement
and replace the computer's chassis cover.
4.
through Cat. 5 or Cat. 5 enhanced twisted
pair cable.
3 Driver Installation
Please install the driver according to the
following steps:
1. Start PC, and insert the CD
attached in the packing. The computer
would run the CD automatically and display
TendaSetup on the screen. (If the computer
is not running the CD automatically, please
double click the CD and run
"TendaSetup.exe" ), please click the icon
of "driver software" to install the driving
software.
2. Please click "TEL9901G" ， select
"the language of driver software" and
then click "Enter" to start installation.
3. Please select the directory for
installation and click "Next"
4. Please click "Finish" and you now
install the driver successfully.
Connect TEL9901G to the network
5
Advertisement
