Interface/Button; Installation Notes - Tenda AV1000 User Manual

1.4 Interface/Button

LAN: For connecting to the Internet, a PC, or other network device via an
Ethernet cable.
Pair/Reset: Press it for 1-3 seconds to pair with other adapters; and press it
for more than 6 seconds, the PLC LED will blink 3 times continually and the
adapter restores to factory default settings.

1.5 Installation Notes

Read this guide before you operate this device, pay close attention to below
notes.
 Make sure that there are no flammable objects or conductive objects
around the device.
 The device will produce amount of heat during its running. Please make
sure it is placed in a well-ventilated environment and keep it away from
water or any other liquid.
 DO NOT expose the device to the sun or other strong heat source directly.
 DO NOT expose the device to corrosive substances (such as acid and
alkali, etc.).
 DO NOT place any object on the device.
 Keep ventilator clean and unblocked. The foreign substances may cause
short circuit, even worse, cause fire or damage to the device.
AV1000 Gigabit Powerline Adapter
3