Front/Rear Panel Connectors - GE VMIVME-7805 Hardware Reference Manual

1.5 Front/Rear Panel Connectors

The VMIVME-7805/VME-7805RC provide front panel access to the PMC
expansion site, the DVI connector, the 10/100 and Gigabit Ethernet (GbE)
connectors, the manual reset switch, COM ports 1 and 2, one USB port and the
status LEDs. A drawing of the VMIVME-7805/VME-7805RC front panel is shown
in Figure 1-4. The front panel connectors and indicators are labeled as follows:
• GBE GbE connector
• 10/100 10/100 Mbit Ethernet connector
• DVI DVI video connector
• RST Manual reset switch
• COM 1:2 Two COM ports
• M/K Combination mouse/keyboard
connector
• USB USB connector
• RPIB Status LEDs
The VMIVME-7805/VME-7805RC provide rear I/O support for the following:
PMC, IDE drive and floppy drive. These signals are accessed by the use of a rear
transition module (RTM) such as the VMIACC-0562/ACC-0562RC, which
terminates into industry standard connectors.
The front panel connectors, including connector pinouts and orientation, for the
VMIVME-7805/VME-7805RC are defined in Appendix A: Connectors and
Pinouts, page 52. Rear panel connections are defined in the appropriate RTM
Installation Guide. Contact Sales for compatible RTMs offered by GE.
Handling and Installation 21