Nikon Coolpix A1000 User Manual page 223

Control
4 Power button
5 Status lamp
6 Shutter-release button
k (apply selection) button
7
w1 (Function 1) / w2
8
(Function 2) buttons
Status Lamp on the Remote Control (for COOLPIX A1000)
Color
Green Flashing about every second
Flashing quickly (about every
Green
0.5 seconds)
Green Flashing about every 3 seconds
Orange Flashes once
Orange Flashes twice
Red Flashes once
Red Flashes twice
Technical Notes
Accessories
Press the button to turn on the remote control and
search for a camera that has already been paired.
Press and hold the button (for at least 3 seconds) to
search for a new pairing camera. To turn off the
remote control, press the button again.
Indicates the remote control status or shooting
session status, based on the color and behavior of
the lamp. See "Status Lamp on the Remote Control
(for COOLPIX A1000)" (A209) for more information.
Functions similarly to the shutter-release button on
the camera.
Half-press and press-and-hold operations are not
available.
When using the self-timer, you can press the
button during the countdown to cancel shooting.
Applies the selected item. When adjusting manual
focus, press this button to stop focusing.
Cannot be used with this camera.
Status
209
Function
Description
Remote control is searching for a camera
that has already been paired.
Pairing process is being performed.
Connection is established between
remote control and camera.
Still image shooting starts.
Still image shooting ends (Time-lapse
movie, Multiple exp. Lighten).
Movie recording starts.
Movie recording ends.