Table of Contents
Advertisement
C
RAW Images of This Camera
RAW images cannot be processed on this camera.
ViewNX-i (A116) needs to be installed on the computer to be able to view RAW images
on the computer.
RAW images cannot be edited or printed directly. You can adjust images or process RAW
images if you transfer RAW images to a computer, and then use software such as Capture
NX-D (A118).
C
Saving of RAW and JPEG Images at the Same Time
The RAW image and the JPEG image that are saved at the same time have the same file
number but with their own extensions, ".NRW" and ".JPG" respectively (A206).
When playing back on the camera, only the JPEG image is displayed.
Note that when the JPEG image is deleted, the RAW image that was saved at the same
time is also deleted.
C
Number of Images That Can Be Saved
The approximate number of images that can be saved can be checked on the screen
when shooting (A23).
Note that due to JPEG compression, the number of images that can be saved may vary
greatly depending on the image content, even when using memory cards with the same
capacity and the same image quality and image size settings. In addition, the number of
images that can be saved may vary depending on the make of the memory card.
If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows "9999."
Using the Menu
The Shooting Menu (Common Across Shooting Modes)
128
Advertisement
Table of Contents
