Nikon Coolpix A1000 User Manual page 218

Hide thumbs Also See for Coolpix A1000:
Table of Contents

Advertisement

Problem
The camera does
not respond
when operating
the ML-L7
2
Remote Control.
Cannot be paired
with the ML-L7
2
Remote Control.
Images saved in the
camera are not
displayed on a
connected smart
device or computer.
Images are not
displayed on TV.
Nikon Transfer 2
does not start
when the camera
is connected to a
computer.
The PictBridge
screen is not
displayed when
the camera is
connected to a
printer.
Images to be
printed are not
displayed.
Technical Notes
Troubleshooting
The camera is not connected to the ML-L7 Remote
Control (available separately). Press the power button on
the remote control to establish the connection. If M is not
displayed on the shooting screen, perform pairing again.
The remote control can be used only for shooting operations.
The w1/w2 buttons on the remote control cannot be
used with this camera.
Check the Network menu settings in the camera.
Set Choose connection to Remote control.
Set Airplane mode to Off.
Set Bluetooth M Connection to Enable.
If the number of images saved on a memory card in the
camera exceeds 10,000, images captured thereafter may not
be displayed in a connected device.
Reduce the number of images saved on the memory
card. Copy the necessary images to a computer, etc.
A computer or printer is connected to the camera.
The memory card contains no images.
Remove the memory card to play back images in the
internal memory.
The camera is off.
The battery is exhausted.
The USB cable is not correctly connected.
The camera is not recognized by the computer.
The computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon Transfer
2, refer to help information contained in ViewNX-i.
With some PictBridge-compatible printers, the PictBridge
startup screen may not be displayed and it may be
impossible to print images when Auto is selected for
Charge by computer in the setup menu. Set Charge by
computer to Off and reconnect the camera to the printer.
The memory card contains no images.
Remove the memory card to print images in the internal
memory.
Cause/Solution
204
A
210
208
208
158
16
16, 17,
188
110,
116
175
16

Advertisement

Table of Contents
loading

Table of Contents