Krom Schroder BCU 500 Operating Instructions

Power module and parameter chip card

Advertisement

050
www.docuthek.com
D
GB
 
Operating instructions
Power module and parameter chip
card for control units
BCU 500, FCU 500
Contents
Contents
Power module and parameter chip card
for control units BCU 500, FCU 500 . . . . . . . . 
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Checking The Usage . . . . . . . . . . . . . . . . . . . . . 
Replacing the power module
and parameter chip card . . . . . . . . . . . . . . . . . 
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . 4
Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety

Safety
Please read and keep in a safe place
Please read through these instructions
carefully before installing or operating. Following the
installation, pass the instructions on to the opera-
tor. This unit must be installed and commissioned
in accordance with the regulations and standards
in force. These instructions can also be found at
www.docuthek.com.
Explanation of symbols
• ,  ,  ,  ... = Action
= Instruction
Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
Safety instructions
Information that is relevant for safety is indicated in
the instructions as follows:
DANGER
Indicates potentially fatal situations.
WARNING
Indicates possible danger to life and limb.
CAUTION
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Transport
On receipt of the product, check that the delivery is
complete (see Part designations). Report any trans-
port damage immediately.
Storage
Store the product in a dry place. Ambient tempera-
ture: see Technical data.
GB-1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BCU 500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Krom Schroder BCU 500

  • Page 1 Power module and parameter chip card WARNING for control units BCU 500, FCU 500 . . . . . . . .  Indicates possible danger to life and limb. Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
  • Page 2 Parameter chip card Checking the usage Power module The parameter chip card is required for operation of control units BCU 500 or FCU 500. All the parameters specific to the system are saved on the parameter chip card. To replace a parameter chip card with identical type code, see type label.
  • Page 3 ▷ If an incorrect or defective power module is used, Replacing the power module the display of the control unit shows the blinking and parameter chip card message  36 on commissioning.  Switch off the system. 7 Slide on the (new) power module. 8 Place the control unit onto the DIN rail.
  • Page 4 ▷ Further fault messages can be found in Assistance in the event of the operating instructions of the relevant malfunction control unit . DANGER Technical data Electric shocks can be fatal! Before working on Connection terminals: possible live components, ensure the unit is discon- Screw terminals: nected from the power supply.

This manual is also suitable for:

Fcu 500

Table of Contents