Mitsubishi Electric RD62P2E Application User's Manual page 81

• To perform the preset
(126) Turns on 'CH1 Preset command' (Y1001).
(148) Turns off 'CH1 Preset command' (Y1001).
■Program example of the counter function selection
When using the functions listed below, use the following programs.
• To use the count disable function
(157) Starts and stops the count disable function
• To use the latch counter function
(159) Starts and stops the latch counter function
• To use the sampling counter function
(157) Starts and stops the latch counter function
• To use the cycle pulse counter function
(157) Starts and stops the cycle pulse counter function
■Processing of the overflow detection
Create the program only when the linear counter is used.
(178) Turns on 'LED signal for overflow occurrence check' (Y41) when an overflow is detected.
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
A
APPENDICES
79