Mitsubishi Electric RD62P2E Application User's Manual page 77

6.
Set "Application setting" of "Module Parameter" of the high-speed counter module as shown below.
[Navigation window]  [Parameter]  [Module Information]  [RD62P2]  [Module Parameter]  [Application setting]
*1
Setting item
Counter Function Selection
Sampling Time Setting/Period Time Setting
Function input response time setting
Preset input response time setting
Pulse Measuring Interval Setting
PWM Output Interval Time Setting
PWM Output On Time Setting 1
PWM Output On Time Setting 2
CPU error output mode setting
*1 Use CH1 only. For CH2, setting items are all default value.
*2 Set the parameter only when the sampling counter function is used.
*3 Set the parameter only when the cycle pulse counter function is used.
*4 Set the parameter only when the pulse measurement mode is used.
*5 Set the parameter only when the PWM output mode is used.
Setting value
Set the parameter according to the counter function used.
• 1000  10ms
*3
• 500  10ms
4: Response time 0.1ms (default value)
4: Response time 0.1ms (default value)
*4
2: Rise - Rise
*5
1500  0.1s
*5
500  0.1s
0  0.1s (default value)
0: Clear (default value)
Appendix 4 Operation Examples of When the Remote Head Module Is Mounted
*2
A
APPENDICES
75