Advertisement
9 9 warninG! The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
‰
9
9 9 warninG! do not operate the machine without a water supply. dry running can seriously damage the unit.
‰
9
9 9 warninG! do not leave the washer switched on for more than 15 minutes without operating the trigger.
‰
9
9 9 do not obstruct ventilation grilles during operation.
9 8
9 9 do not use the washer with flammable or toxic liquids or any other product. use only recommended detergent. unapproved
9 8
detergents may corrode the machine cover and accessories.
9 9 do not jam the trigger in the operating position.
9 8
9 9 do not adjust any internal control valves, as they have been factory set.
9 8
9 9 do not connect other appliances to the machine inlet or outlet.
9 8
do not use hoses and fittings other than those designed for use with this machine.
9 8
9 9
do not move the unit by pulling the hoses or electrical cables. use the handle and transport by means of the wheels.
8
do not touch plug with wet hands. to avoid the risk of electrocution keep all connections dry and off the ground.
8
do not direct jet against yourself, other persons, animals, electrical equipment or the machine itself.
8
do not use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
do not allow children or untrained persons to operate the washer.
8
9 9 warninG! Discharge residual pressure before disconnecting the washer hose. Pressure left in unit may cause injury.
‰
9
After use, disconnect washer from electrical mains and water supply and store in a safe, dry, childproof area.
9
Protect from freezing conditions during winter.
9
9
9 9
note: Pressure washer shall not be used by children. children should be supervised to ensure that they do not play with the machine.
the machine can be used by people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning the use of the machine in a safe way and understand the hazards involved.
2.
introduCtion
i
Professional unit, designed and manufactured in italy. ideal for a wide variety of applications including commercial and agricultural use. fitted
with a powerful 2500W induction motor and brass pump head and fittings with ceramic pistons. Capable of pumping up to 8.3 litres of water per
minute with a maximum pressure of 150bar. The PW5000 features Automatic Total Stop System (TSS) technology which switches the motor
on and off when the lance trigger is operated, prolonging motor life. Fitted with 10mtr hose reel, built-in pressure gauge, adjustable pressure
controls and 3ltr detergent tank. supplied with 5 interchangeable nozzle attachments. manufactured with a lightweight, durable aluminium frame
and large heavy-duty wheels.
3. speCifiCation
Model no: ................................................................ pw5000
maximum Pressure: ..................................... 150bar(2200psi)
Water flow: ................................................................498ltr/hr
motor power: ...............................................................2500W
supply: ....................................................................230V-13A
total stop system: ............................................................ Yes
Hose length: ..................................................................10mtr
Weight: ........................................................................ 33.2kg
Wash nozzles: .. pencil jet, fan jet, 15°, 25°, 40°, low pressure
noise power: ..................................................................92dB
noise pressure: .........................................................83.96dB
4. asseMBlY
4.1.
Attach handle/reel assembly to the machine base by
sliding the handle tubes over tubular stubs protruding
from base and securing by means of M6 x 40 bolts
(x2) and securing knobs.
4.2.
Attach winding handle to the reel by 4mm hex bolt.
‰ ‰ WARNING! Ensure that the transit plug fitted to the
‰
‰
oil filler is replaced by the vented dipstick supplied.
(See fig.1)
4.3.
Connecting the water supply.
4.3.1.
Use a reinforced hose pipe with an internal diameter of 1/2" and
connect to the mains water supply. Before attaching the hose to
the pressure washer flush the hose through with some clean water
to remove any foreign matter from within the hose.
4.3.2.
connect female quick connection hose fitting to the clear inlet filter
on the front of the machine (fig.2).
4.3.3.
Push male leader hose connection (fig.3.1.) into the pump outlet
connector (fig.3.2) and secure by tightening the collar (fig.3.3). Push
the nozzle into the gun as shown in fig.4 (1 and 2) and screw the
threaded male lance connector into the gun, again ensuring that
the connection is tight.
4.4.
Connecting to mains electrical supply.
9 9 warninG! Ensure the On/Off switch (fig.5) is in the 'Off' position.
‰
9
using an rcd plugged into a 13A mains socket, do not turn the
power on. do not touch the plug with wet hands
© Jack sealey limited
fig.1
Original Language Version
fig.2
PW5000 | Issue:2(L) 11/04/17
Advertisement
