Advertisement
7.3.
Cooling system.
the air vent at the rear of the motor, must be kept clean and free of any obstructions to ensure proper air cooling during operation.
warninG! Prevent water from penetrating the vent to minimise the risk of damage to the machine and to reduce the risk of shock to
‰
the operator.
7.4.
General.
check unit, gun, nozzle, hose, connections and cables for damage. immediately replace or repair with genuine parts.
7.5.
storage.
7.5.1.
Store in a location where the washer will not be subject to freezing conditions.
7.5.2.
make sure that the pressure washer has been drained of water and remove the hoses.
recycle unwanted materials instead of disposing of them as waste. all tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
dispose of this product at the end of its working life in compliance with the eu directive on
Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed
of in an environmentally protective way. Contact your local solid waste authority for recycling information.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMportant: no liability is accepted for incorrect use of this product.
warrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
environmental protection
weee regulations
sole uK distributor, sealey Group.
Kempson Way, Suffolk Business Park,
Bury st. edmunds, suffolk.
iP32 7AR
Original Language Version
01284 757500
01284 703534
PW5000 | Issue:2(L) 11/04/17
www.sealey.co.uk
web
sales@sealey.co.uk
Advertisement
