Advertisement
Damaged vehicle tyres/tyre valves can be dangerous.
WARNING! High pressure jets can be dangerous if subject to misuse. The jet MUST NOT be directed at persons, animals, live
‰
electrical equipment or the machine itself.
WARNING! DO NOT direct the jet against yourself or others in order to clean clothes or footwear.
‰
WARNING! High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and
‰
couplings recommended by Sealey. Protect these components against damage by avoiding their improper use and protecting them
against bending, knocks and scratches.
DO NOT leave in standby for more than 5 minutes. Machine is fitted with Automatic Stop System.
8
Switch Master switch to Off whenever it is left unattended.
9
Take care to not damage the electric cable. if the supply cord is damaged it must be replaced by the manufacturer or their service
9
agent or similarly qualified persons.
WARNING! Machine has fluid under pressure. Keep a firm hold and be prepared to take the kickback pressure. Only use the high
‰
pressure nozzle supplied with the machine.
DO NOT start without completely unwinding the high pressure hose. When winding/unwinding the hose take care that the machine
8
does not over turn.
Before winding/unwinding the hose switch the machine off and release the pressure in the hose.
9
▲
DANGER Risk of explosion DO NOT spray flammable liquids.
DO NOT direct the jet against yourself or others in order to clean clothes or footwear.
8
WARNING! Water that has passed through a back flow preventer is considered to be non-potable.
‰
Disconnect from the power supply during cleaning and maintenance.
9
WARNING! Inadequate extension cords can be dangerous. If an extensions cord is used, it shall be suitable for outdoor use, and the
‰
connection kept dry and off the ground. It is recommended that this is accomplished by means of a cord reel which keeps the socket at
least 60mm above the ground.
DO NOT cover the unit.
8
DO NOT use the machine during thunderstorms or when it is raining.
8
DO NOT use the machine on flammable surfaces.
8
WARNING! Never touch the machine with wet hands or bare feet.
‰
DO NOT pull the mains cable or machine in order to disconnect the plug from the socket.
8
1.3.
SAFETY DEVICE
WARNING! The gun is fitted with a safety catch. Whenever use of the machine is interrupted it is important to operate the safety catch
‰
to prevent accidental activation of the jet. The safety catch on the gun is not for locking the lever during operation but to prevent its
accidental operation.
WARNING! The machine is fitted with a motor protection device. In case of device intervention wait a few minutes or disconnect and
‰
reconnect to the mains supply. If the machine does not start again take it to an approved service agent.
The machine must always be used/kept on a horizontal surface so that it remains safe and stable.
9
2.
INTRODUCTION
Professional, heavy-duty hot/cold water pressure washer. Ideal for a range of applications
including cleaning vehicles, commercial equipment, motorbikes, patios and decking. Fitted
with a heavy-duty, upgraded induction electric motor with a diesel water heater. Double
motor (pump and burner) with three high durability steel pistons and aluminium axial pump.
Vertical boiler with high efficiency steel coil and safety valve. Automatic temperature
regulation. Detergent tank is built-in for direct suction. Features an automatic Total Stop
System (TSS) which switches the motor and heater on and off when the lance trigger is
operated, prolonging the motor life. Manufactured with heavy-duty plastic wheels for
transportation over rough terrain.
3. SPECIFICATION
Model no ....................................................... PW2000HW.V2
Detergent tank ....................................................... Integrated
Flow rate .................................................................... 420L/hr
Fuse Rating: ....................................................................13A
Heating Fuel ...............................Diesel (Tank Capacity 4.9L)
Hose length ....................................................................... 8m
Motor power ................................................................2300W
Motor ........................................................................Induction
Peak water temperature ................................................. 80°C
Power Supply Cable Length: ............................................. 6m
Pump head.................................................... Aluminium Axial
Supply ............................................................... 230V ~ 50Hz
Vibration/Uncertainty ........................................ 1.26/0.22m/s²
4. ASSEMBLY
4.1.
Fit handle, refer to fig.1.
5. FEATURES
1. Burner switch
4. Water outlet
7. Lance
10. Diesel tank
13. Filter
© Jack Sealey Limited
2. ON/OFF Electric pump switch
5. High pressure hose
8. Nozzle
11 Electric cable
14. Garden hose adaptor
Original Language Version
3. Detergent tank
6. Gun
9. Nozzle cleaning tool
12. Water inlet
15. Handle
PW2000HW.V2
fig.1
`
fig.2
Issue 2 (H,1,2,3,F)
15/05/23
Advertisement
