Advertisement
2. INTRODUCTION
Powerful unit designed for frequent domestic and light trade use. Ideal for a
range of applications including cleaning vehicles, patios, decking, motorbikes
and barbecues. Fitted with a powerful 1900W motor with 420 litre water flow per
hour and a maximum pressure output of 130bar. Features Automatic Total Stop
System (TSS) which switches the motor on and off when the trigger is operated,
prolonging motor life. Includes accessory storage to ensure unit stays clutter-free
and fully mobile. Supplied with 4m hose, foam lance and bottle, variable spray
nozzle and Rotablast® Turbo nozzle which helps develop the same effective
cleaning power (ECP) as a 180bar/2600psi pressure washer. Supplied with power
cable fitted with 3-pin plug.
3. SPECIFICATION
MODEL NO: ............................................................ PW1850
Electrical Plug Type: ................................................ 3-Pin BS
Hose Length:..................................................................... 4m
Maximum Pressure: ..................................... 130bar(1885psi)
Maximum Water Flow:................................................ 420L/hr
Motor Power:...............................................................1900W
Noise Rating: .................................................................92dB
Nozzles: ...........Variable Spray and Rotablast® Turbo Nozzle
Rated Pressure: ........................................... 100bar(1450psi)
Rotablast Nozzle®: .......................................................... Yes
Supply: ................................................................. 230V - 13A
Total Stop System: ........................................................... Yes
Vibration/Uncertainty: ....................................... 3.30m/s²/0.47
Water Flow Rate: ....................................................... 420L/hr
4. CONTENTS
A). 4m hose ....................................................................... 1x
B). Bottle ............................................................................ 1x
C). Variable spray nozzle ................................................... 1x
D). Rotablast®Turbo nozzle ............................................... 1x
E). Foam lance .................................................................. 1x
F). Pressure Washer Gun .................................................. 1x
5. OPERATION
5.1.
PUT INTO SERVICE / STARTING UP
5.1.1.
Connect the high pressure hose to the pressure washer gun. See fig. 2.
5.1.2.
Push the high pressure hose into the pressure washer gun.
NOTE:
Make sure the connection nipple is aligned correctly.
5.1.3.
Check the secure connection by pulling on the high pressure hose. See fig. 3.
© Jack Sealey Limited
fig.2
fig.3
Original Language Version
fig.1
PW1850 Issue 2 (2) 10/02/21
Advertisement
