Advertisement
Before activating the trigger, GRIP the gun firmly to counteract the recoil from the high pressure water jet.
WARNING! Avoid sudden bursts of water as these will cause water pressure to drop and put extreme pressure on hoses and
connectors.
If, during operation, power failure occurs turn the electricity and water off for safety reasons, (See Note 'c' at end of Section 4).
WARNING! The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
WARNING! DO NOT operate the machine without a water supply. Dry running can seriously damage the unit.
WARNING! DO NOT leave the washer switched on for more than 15 minutes without operating the trigger.
DO NOT obstruct ventilation grills during operation.
DO NOT use the washer with flammable or toxic liquids or any other product. Use only recommended detergent. Unapproved
detergents may corrode the machine cover and accessories.
DO NOT jam the trigger in the operating position.
DO NOT adjust any internal control valves, as they have been factory set.
DO NOT connect other appliances to the machine inlet or outlet.
DO NOT use in damp or wet weather conditions.
DO NOT move the unit by pulling the hoses or electrical cables. Use the handle.
DO NOT touch plug with wet hands. To avoid the risk of electrocution keep all connections dry and off the ground.
DO NOT direct jet against yourself, other persons, animals, electrical equipment or the machine itself.
DO NOT use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT allow children or untrained persons to operate the washer.
WARNING! Discharge residual pressure before disconnecting the washer hose. Pressure left in unit may cause injury.
After use, disconnect washer from electrical mains and water supply and store in a safe, dry, childproof area.
1.
INTRODUCTION
Heavy-duty induction motor unit produces enough power to pump 400 litres of water every hour. Pump fitted with high pressure by-pass to
preserve pump life. Features Automatic Total Stop System which switches the motor on and off when the lance trigger is operated, prolonging
the motor life. Supplied with 6mtr hose, jet/flat lance and Rotablast Nozzle® which helps develop the same Effective Cleaning Power (ECP) as
a 3400psi washer. Includes integral detergent tank and detergent flow control valve. Suitable for a wide range of automotive, industrial,
agricultural, marine and domestic applications.
2.
CONTENTS & SPECIFICATION
Unpack the product and check contents
against the list below. Also check that the
machine has an identification plate or
label.
If label or parts are damaged or missing
contact your supplier immediately.
1
Power cable
2
ON/OFF Switch
3
Water supply rapid attachment
4
Filter
5
Rotablast nozzle jet
6
Variable nozzle jet
7
Spray gun
8
Trigger lock
9
Water supply attachment
10
High pressure pipe
11
Detergent tank
12
Hose Reel
1 3
Detergent adjustment.
By rotating the stream of water at high
speed, it is possible to increase the
effective cleaning pressure of washer. We
quote the pressure at which the water
leaves the pump as 'Manifold Pressure' and
express the cleaning power of the washer
as the 'Effective Cleaning Pressure'.
2.1. SPECIFICATION
Model No. . . . . . . . . . . . . . . . . . . . PC3401
Manifold Pressure . . . . . . . . . . . . . . 100bar
Effective Cleaning Power . . . . . . . 3400psi
Water Flow . . . . . . . . . . . . . . . . . . 400ltr/hr
Motor Power . . . . . . . . . . . . . . . . . . 1800W
Input Voltage/Current . . . . . . . . 230V/8.7A
Max. Inlet Temp. . . . . . . . . . . . . . . . . .50
Hose Length . . . . . . . . . . . . . . . . . . . . 6mtr
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 17kg
o
C
PC3401.V2
Issue: 2 - 01/06/11
Advertisement
