Product Operation - Vileda VR 201 PetPro User & Care Manual

BUTTONS, DISPLAY AND CLEANING MODES
G
TO TURN ON THE ROBOT, ACTIVATE THE MAIN SWITCH: "ON" (9)
1a. SILENT BUTTON
In standby or auto-cleaning mode, press the SILENT button to enter the quiet cleaning mode for more comfort
while cleaning.
The robot will automatically choose the optimal cleaning pattern and reduce its noise level, by reducing
speed, brush bar rotation and suction power for a more quiet product performance.
In silent cleaning mode, press SILENT button to enter the standby mode.
In plan mode: increase number when scheduling cleaning and setting time
1b. HOME BUTTON
In standby or operating mode, press the HOME button to find docking station and charge.
In plan mode: decrease number when scheduling cleaning.
1c. TIME, ERROR CODE AND BATTERY STATUS INDICATION
The number and letter combinations display the current time, scheduled cleaning and error codes.
The battery indication displays the remaining capacity level and battery charging status.
1d. PLAN BUTTON
You can program the cleaning time of your robot according to your needs. The robot will then automatically
start to clean every day at the set time.
Step 1: In standby mode press the PLAN and HOME button to enter the clock setting mode
Step 2: In standby mode press the PLAN button to enter the time setting mode for daily cleaning
To clear the scheduled cleaning time, press the PLAN button for 5 seconds
1e. AUTO-CLEANING BUTTON
In standby or silent mode, press AUTO button to enter the auto cleaning mode.
The robot will automatically choose the optimal cleaning pattern, consisting of an iteration of auto, zig-zag
and spiral movement pattern.
In auto cleaning mode, press the AUTO button to enter standby mode.
1f. POWER BUTTON
Press the POWER button to switch the robot on and off. By pressing it when the robot is working, it enters
standby mode.
In standby mode, press POWER button to enter sleep mode.
Note: To switch off the sound of the robot press SILENT + PLAN button simultaneously
3.1 BATTERY CHARGING & RECHARGING
The battery indication (1c) is displayed in three blocks:
Three blocks illuminated: Battery is fully charged and full Auto and Silent program can be used.
Two blocks illuminated: Battery is half charged.
One block illuminated: Battery level is low. Recommended to start charging.
One block blinking: Battery needs to be charged. No cleaning mode possible.
!
TIPS TO EXTEND THE BATTERY LIFE:
• Before first use, charge the robot for 5-6 hours.
• Charge the robot as soon as battery power is low.
• If the robot is not to be used for a long time, fully charge the battery, turn the power switch off,
remove and store it in a cool, dry place.
• If the robot is not to be used for 3 months or longer, charge it directly by the power adapter for 5-6
hours.
3.2 TURNING ON AND OFF
STARTING UP
To turn your robot on, activate the mainswitch, next to the dust box (9). You will hear a sound and the LED
display and the buttons will be illuminated.
If the plan mode is activated, the plan button will get illuminated as well.
To start the AUTO or SILENT cleaning cycle press the "AUTO" or "SILENT" mode button.
To pause the robot press the activated button again.
14

3. PRODUCT OPERATION