Maintenance - Vileda VR 201 PetPro User & Care Manual

Note: When starting the robot, place it in the middle of a room or surface, at least half a metre away from an edge
with a drop.
STANDBY
Standby means, the robots main power is turned on, and the robot is ready to use. The power button is
flashing. When the robot is cleaning, press the activated button on main body to pause the robot and enter
standby mode.
SLEEP MODE
In sleep mode the robots display will turn dark (but robot is not powered off). The power button is pulsating
slowly.
In order to save power, you can turn the robot into sleep mode from standby mode via either of the following
methods:
• Long press "POWER" button on main body
• Robot will automatically enter sleep mode if the power is low or after 5min in standby mode
POWER OFF
To turn the device off, deactivate the robot at its main switch (9).
Note: when storing the robot for a longer period of time, make sure the robot is switched off
3.3 TIME SCHEDULING
Please take page 8 in the manual for reference.
!
TIPS FOR EASY SCHEDULING
• The scheduling time uses the machine's time as a reference. So, before scheduling, please set
the robots time clock to be the same as real time.
• Once scheduled the machine, it will start cleaning at that time automatically, when the main switch
is switched on. The programed time will remain saved, even when switching the device off.
• To clear the scheduled cleaning time, press the "PLAN" button for 5 seconds.
Note: The robot can only be set when it's in standby or charging on docking station. If the robot is in sleep mode,
long press "POWER" button on main body. If the robot is in cleaning mode, pause it before scheduling.
Please take page 4-7 in the manual for reference
Tips for keeping the performance stable:
To keep your Vileda robot at the best level of performance, it is recommended to maintain the robot regularly.
Robot Part
Dust box
Side brush and
main brush
High efficiency filter
Front wheel and
driving wheels
Drop sensors
Charging contacts

4. MAINTENANCE

Care Frequency
After every use
Once per week (twice
per week in home
with pets) and when
maintenance code "1" is
displayed
Once per month (twice
per month in home
with pets) and when
maintenance code «2» is
displayed
Once per month and
when maintenance code
"2" is displayed
Care Code Replacement
Frequency
—
Every 6-12 months for
the side brushes
High efficiency filter:
Every 4 months
G
—
—
15