FiField Bonfire Owner's Manual page 20

LCD Function Summary
The LCD screen provides a
wide range of functions and
indicators to the fit your needs.
The indicated contents are as
follows:

Battery level indicator

Speed display

Trip distance and total distance

Cruise control (when walking)

Headlight on/off

Motor power (wattage)

Trip distance and total distance
The LCD has three buttons.
MODE UP
CAUTION
Try to avoid hitting the screen.
Do not try to modify the system
parameters as it may cause
malfunctions.
WARNING
Contact service center if an error
code is displayed. Do not attempt
to fix it yourself.
Display Interface
After starting up the display,
the default setting will show
Running Speed. Press MODE to
change the information from
DOWN
Running Speed to Average Speed,
Max Speed, Trip Distance, Total
Distance, and Trip Time.
Cruise Control
Press and hold DOWN to
enable power assistance while
walking the bicycle. Your bike will
go at a speed of 3.7 MPH (6
KmPH).
NOTE: This function can only be
used while pushing/walking the
electric bike by hand. Please do not
use this function while riding.
Backlight On/Off
Hold UP for 2 seconds to turn
on the backlight of the display; this
will also power on the headlight.
Hold UP again for 2 seconds to
turn off.
Power Assist Level Selection
Press UP or DOWN to change
desired output of power. The
power ranges from 0-6. Level 0 will
supply no power to the pedal
assist and level 6 will supply the
maximum. The default value is
level 1 though you will be able to
shift freely at any time. Your
current level of power assist can
be seen in the bottom left corner
of the LCD screen labeled as
"PAS".
16