FiField Bonfire Owner's Manual page 12

1. Use the 4mm allen wrench and
remove the headlight. Do not
disconnect any cables, only
remove the single bolt and
washer keeping the headlight
connected to the fork (shown
below) and allow the headlight
to hang freely. This bolt and
washer will be used later; set it
aside and be sure not to
misplace it.
2. Use the Phillips head screwdriver and remove the fork lock from
the frame. The lock is located on the frame where the handlebars
will later be placed. When this lock is removed the fork will not be
secured to the frame and can be easily removed. After removal,
the lock will not be used again and can be discarded. Please be
aware that if the fork accidently slips out this is not a problem, to
resolve simply slide it back into place and reinsert the spacers
into their original positions (shown below).
8