FiField Bonfire Owner's Manual page 13

3. Properly align the handlebars so the brakes are facing outward
and put them into place over the frame. Push downward until no
silver is showing on the frame. To tighten, use the 5mm allen
wrench and tighten the top bolt until it is securely in place.
4. The handlebars are currently
positioned at a 90 degree
angle; bring the handlebars
to a straight position
perpendicular to the ground.
Locate the two4mm bolts on
the side of the handlebars.
These bolts are used to lock
the handlebars in place.
Make sure that the
handlebars are in an
appropriate riding position
with the fork and use the
allen wrench to tighten.
9