Kenmore 153.14076810 Use & Care Manual page 8

Assembly Step 5: Wheels and Casters to Legs
Screw a locking caster into the left front leg and left rear leg. Tighten the casters securely. Slide one wheel
onto the axle then insert the axle through the holes in the right front and rear legs. Slide the remaining wheel
onto the axle and secure each wheel to axle with one spring washer (C), one washer (M), and one 5/16" cap
nut (N). SET THE SMOKER GRILL UPRIGHT. Note: Fully tighten all bolts at this time.
WARNING! The smoker grill is heavy. To avoid personal injury, obtain the help of an assistant to lay
the unit down and lift it back up.
Assembly Step 6: Side Shelf
Attach side shelf onto the smoker grill barrel
with four 1/4"-20 x 0.5" Screws (I) and four
washers (J) as shown. Note: Use wrench (Q) to
tighten all screws.
8