Using The Sk 3200 Portable Transmitter - Sennheiser GP SK 3200 Instructions For Use Manual

Using the SK 3200 portable transmitter

Intended
operation
Configuring
the portable
transmitter
Automatic
turn-on
Manual
turn-on
Automatic
turn-off
Manual
turn-off
Muting the
microphone
Doing a
guided tour
Temporarily
interrupting a
tour, auto-
matically trig-
gering an
Event
12
What to do
See "Visitor Profiler" software module.
Remove the portable
transmitter from the
charger.
Briefly press the FUNC-
º
TION key .
Insert the portable
transmitter into the
charger.
Press the MUTE key
for 5 seconds.
Briefly press the MUTE
¾
key .
The maximum distance
between the receivers
and the portable trans-
mitter must not exceed
20 m.
Press the FUNCTION
º
key for 3 seconds
while you are in the
magnetic field of the
identifier which triggers
the desired Event.
LED indications/Result
The POWER LED
the READY LED
up.
The POWER LED
the READY LED
off.
¾
The MIC LED
red.
The receivers do not re-
act to identifiers or key
presses and do not re-
produce any Events.
The READY LED
flashes green slowly.
The receivers start re-
producing the corre-
sponding Event.
·
and
»
light
·
and
»
go
flashes
»