Advertisement
STEP 6: Install the supplied hex capscrew (H) through the
hole in both the stiffener bracket and the channel assembly,
securing with a flange nut (D). Tighten the hardware
installed in Steps 5-6.
STEP 7: Using the hole in either end of the stiffener
bracket as a template, drill two 11/32" thru holes (G) down
through the U-tube.
STEP 8: Install the two remaining supplied carriage bolts
(C) down through the holes in the ends of the stiffener
bracket and U-tube. Install one saddle bracket (F) up onto
each bolt thread, and secure with a flange nut (D). Tighten
securely.
STEP 9: Reassemble the twin bag catcher components
removed in Steps 1-3. Refer to the twin bag catcher
instructions.
ASSEMBLY IS COMPLETE
INSTRUCTION No. 7101366 (I.R. 3/27/2007)
2
TP 200-5265-IR-AT-SN
Advertisement
