IMPORTANT SAFETY INSTRUCTIONS All safety instructions and operating instructions in the manuals provided with the Snapper Lawn Tractor and this Grass Catcher attachment must be followed. Read, understand, and follow ALL instructions and warnings in the Operator’s Manual provided with the machine, with this attachment, and ALL instructions and warnings on the machine, engine and attachment.
Installation Instructions Install Bagger Mount 1) Remove three bolts – two on the rear of the tractor frame, and the top bolt on the right rear of the tractor frame. See Figure 1. The two rear bolts will be replaced with longer bolts supplied in the kit.
Page 4
Install Grass Bags 1) Align the slot on the hanger of the Grass Bag Assembly (7500995) with the tab on the grass bag support. 2) Insert the tab into the slot. Repeat for all three grass bags. See Figure 4. Figure 4 Install Cover Assembly 1) Attach the Cover Assembly (7500996)
Page 5
Install Upper Elbow Tube and Middle Grass Tube 1) Slide upper elbow (1733885) into the cover, aligning the ridges with the notches in the cover opening. The opening of the elbow tube must face towards the center of the catcher. See Figure 7. Opening of elbow facing center of catcher...
Operation and Maintenance Instructions INTRODUCTION: Follow operation and maintenance instructions in the Operator’s Manual provided with the Snapper Lawn Tractor. GRASS CATCHER OPERATION 1) Select desired cutting height. Choose a setting that will not attempt to cut off too much at once, overloading the machine.
Use only genuine SNAPPER replacement blades. 7) Mower equipped with incorrect blade. Contact your local SNAPPER dealer for assistance in choosing the correct blade for your application. 8) Deck, adapter, or tube has clipping build up – clean all clippings from all internal surfaces.