Security; General Information; Exposure To Rf Energy; Efficient Modem Operation - FALCOM SAMBA 75 User Manual

Table of Contents

Advertisement

SAMBA 75 USER'S GUIDE

1 SECURITY

IMPORTANT FOR THE EFFICIENT AND SAFE OPERATION OF YOUR GSM-MODEM, READ
THIS INFORMATION BEFORE USE!
Your cellular engine SAMBA 75 is one of the most exciting and innovative electronic
products ever developed. With it you can stay in contact with your office, your
home, emergency services and others, wherever service is provided.
This chapter contains important information for the safe and reliable use of the
SAMBA 75 modem. Please read this chapter carefully before starting to use the
cellular engine SAMBA 75.

1.1 General information

Your SAMBA 75 device utilizes the GSM standard for cellular technology. GSM is a
newer radio frequency („RF") technology than the current FM technology that has
been used for radio communications for decades. The GSM standard has been
established for use in the European community and elsewhere. Your SAMBA 75 is
actually a low power radio transmitter and receiver. It sends out and receives radio
frequency energy. When you use your modem, the cellular system handling your
calls controls both the radio frequency and the power level of your cellular modem.

1.2 Exposure to RF energy

There has been some public concern about possible health effects of using a GSM
modem. Although research on health effects from RF energy has focused for many
years on the current RF technology, scientists have begun research regarding newer
radio technologies, such as GSM. After existing research had been reviewed, and
after compliance to all applicable safety standards had been tested, it has been
concluded that the product is fit for use.
If you are concerned about exposure to RF energy there are things you can do to
minimize exposure. Obviously, limiting the duration of your calls will reduce your
exposure to RF energy. In addition, you can reduce RF exposure by operating your
cellular modem efficiently by following the guidelines below.

1.3 Efficient modem operation

In order to operate your modem at the lowest power level, consistent with
satisfactory call quality please take note of the following hints.
If your modem has an extendible antenna, extend it fully. Some models
allow you to place a call with the antenna retracted. However, your
modem operates more efficiently with the antenna fully extended.
Do not hold the antenna when the modem is „IN USE". Holding the
antenna affects call quality and may cause the modem to operate at a
higher power level than needed.

1.4 Antenna care and replacement

Do not use the modem with a damaged antenna. If a damaged antenna comes
into contact with the skin, a minor burn may result. Replace a damaged antenna
immediately. Consult your manual to see if you may change the antenna yourself. If
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
VERSION 1.01
Page 8

Advertisement

Table of Contents
loading

Table of Contents