Caution Statements - BIRD Moduload 8640 Series Operation Manual

Moduload® RF Load Resistor
Never attempt to connect or disconnect RF equipment from the transmission line while
On pages 8 and 11.
Disconnect from RF power sources and the AC line before any disassembly or service.
On page 15.

Caution Statements

The following equipment cautions appear in the text and are repeated here for emphasis.
Do not block air flow. The air intake vents on the side of the heat exchanger and the
On page 4.
On pages 5 and 9.
Check the local electrical code for proper AC hookup prior to operation
On page 5.
Use only distilled water or ethylene glycol as coolant. Do not use tap water, automotive
Use of these materials will damage the unit and void all warranties.
On page 6.
On pages 6, 9, and 12.
Incorrect hose connections will reverse coolant flow and could destroy the load.
On page 15.
iii
RF power is being applied.
Leaking RF energy is a potential health hazard.
Electrical shock hazard.
exhaust on top must not be obstructed.
Do not operate without the interlock. Even momentary
application of RF power while coolant is not circulating could
cause immediate destruction of the load.
of the unit. Make sure the neutral or return hookup is only used
for that purpose.
antifreeze, sealants, or leak stopping material.
Operation without sufficient coolant can damage the unit.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION