Specifications - Snapper 5900700 Operator's Manual

Specifications

Specifications
NOTE: Specifications are correct at time of printing and are subject to change without notice.
*Actual sustained equipment horsepower likely to be lower due to operating limitations and environmental factors.
ENGINE:
13 HP* Kawasaki
Make Kawasaki
Model FH381V
Horsepower 13 @ 3600 rpm
Displacement 26.3 Cu. in (431 cc)
Electrical System 12 Volt Clutch Coil, 13 amp.
Oil Capacity 1.9 US qt. ( 1,8 L) w/ Filter
17 HP* Kawasaki
Make Kawasaki
Model FH541V
Horsepower 17 @ 3600 rpm
Displacement 35.7 Cu. in (585 cc)
Electrical System 12 Volt Clutch Coil, 13 amp.
Oil Capacity 1.9 US qt. ( 1,8 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 5.5 Gallons (20,82 L)
Rear Wheels Tire Size: 18 x 6.50 - 8 (36")
Tire Size: 18 x 8.50 - 8 (48")
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 9 x 3.50 - 4
Inflation Pressure: 25 psi (1,72 bar)
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been obtained and corrected in
accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be lower and is affected by, but not limited
to, ambient operating conditions and engine to engine variability. Given both the wide array of products on which engines are
placed, and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the
rated gross power when used in a given piece of power equipment (actual "on-site" or net power). This difference is due to a
variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.
40
TRANSMISSIONS:
HydroGear ZH-KMBB-3A5A-1LLX (LH)
HydroGear ZH-GMBB-3A5A-1LLX (RH)
Type ZT2800
Hydraulic Fluid SAE 20W-50 motor oil
Speeds Forward: 0-6 MPH (0-9.66 km/h)
@ 3400 rpm Reverse: 0-3 MPH (0-4.83 km/h)
Continuous Torque 180 ft. lbs. (244 N.m.)
Output
Maximum Weight 440 lbs. (200 Kg)
on Axle
DIMENSIONS:
Overall Length
36" Model: 76" (193 cm)
48" Model: 72" (183 cm)
Overall Width
36" Model: 37" (93,9 cm)
48" Model: 49" (124,5 cm)
Height 42" (106,5 cm)
Weight (apx..)
36" Model: 480 lbs. (218 kg)
48" Model: 600 lbs. (272 kg)
www.SnapperPro.com