Reverse Speed Control Levers Adjustment - Snapper 5900700 Operator's Manual

Reverse Speed Control Levers Comfort
Adjustment
The amount of pressure necessary to depress the Reverse
Speed Control Levers (A, Figure 39) can be adjusted to meet
the comfort needs of the operator.
1. Disengage the PTO, engage the parking brake and turn
off the engine.
2. To increase the amount of pressure necessary to
depress the Reverse Speed Control Levers turn the lock
nut (B) CLOCKWISE until the desired comfort level is
achieved. To decrease the amount of pressure
necessary to depress the Reverse Speed Control Levers
turn the lock nut COUNTER-CLOCKWISE until the
desired comfort level is achieved.
3. Repeat process for other side of the unit.
NOTE: Both Reverse Speed Control Levers should be
adjusted so that it takes the same amount of pressure to
depress both handles.
Regular Maintenance
A
Figure 39. Reverse Speed Control Levers Comfort
Adjustment
A. Reverse Speed Control Levers
B. Lock Nut
B
35