Appliance Transport - AEG Santo Operating Instructions Manual

When disposing of your old appliance:
• Make the appliance unusable by cutting off the cable and remove
any door catches to ensure small children cannot be trapped inside.
• The appliance may not be disposed of with domestic waste or bulky
refuse.
• The refrigerant circuit, especially the heat exchanger at the back of
the appliance, may not be damaged.
Help to keep your country tidy - use an authorised disposal site.

Appliance Transport

Two persons are required to transport the appliance. Two handles are
provided on the back of the appliance at the top to enable a better
hold. Before transporting, the plinth cover must be removed to prevent
damage.
0
1. To remove the plinth cover from
the stops, tilt downwards and then
pull forwards.
Important: Do not damage door
contact (if present)
2. Grip the appliance with the
recessed handles positioned as in
the drawing, and transport the
appliance.
3. In order to push the appliance
into its final position, press care-
fully at the top of the door and
tip the appliance back slightly.
The weight is thus transferred to
the back wheels and the appliance can be easily pushed.
4. When the appliance is standing in
the desired place, attach the plinth
cover. First hook at the hitches on
the lower edge, then press the grid
in position. Make sure that the door
contact (if present) is not damaged
and that it engages in the corre-
sponding aperture in the plinth
cover.
8
2
1
818 36 23-02/7