Table of Contents
Advertisement
Replacing the light bulb
Warning! Danger of electrical shock! Before replacing the light bulb
1
switch appliance off and remove the mains plug.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14
Important!
When replacing the lamp only fit a
lamp of suitable diameter, that is at
least 18 mm, this will ensure a good
seat on the rubber seal.
Where to purchase: specialist
retailer or AEG Service Force Centre.
0 To switch off the appliance turn the temperature regulator to
position "0".
0 Unplug the mains plug.
0 To change the light bulb, undo the
cross head screw and remove the
light bulb cover downwards.
0 Change the defective light bulb.
0 Refit the light bulb cover and the
cross head screw.
818 14 28-00/7
Maintenance and Cleaning
23
Advertisement
Table of Contents
