Desk Installation - Tripp Lite Full Motion Flat Screen Desk Mount Owner's Manual

1. Install the Pole and Desk Clamp Assembly
tighten
adjustable height
3mm Hex Key
loosen
collar
3mm Hex Key
3mm Hex Key
tighten

2. Desk Installation

2a. Edge Installation
Note: min. desktop thickness=10mm (.4")
max. desktop thickness=90mm (3.5")
tighten
• Determine approximate location for mount, keeping in mind display size, height adjustment and pitch/roll
requirements.
• Slip the desk mount assembly over the edge of desk so that clamp fully contacts desk edge.
• Turn the knob to adjust the clamp to edge of desk and secure it tightly.
4
14-04-247-933321.indb 4 5/6/2014 1:46:08 PM