Page 1
TP8-P Series TP8-P Series Automatic Booster Pump Instruction Manual ISO 9001 Certi ed WALRUS PUMP CO., LTD.
Page 2
Operation Conditions: 4. After the power switch on, the motor should turn immediately . After a few 1. Ambient temperature: Max. +40°C seconds, the water should be delivered . 2. Liquid temperature: +4°C ~ +40°C 5. If the water does not be delivered immedi- 3.
Page 3
Electrical connection a. Check the electrical power source, fuse, and circuit breaker. This mark located outside the b. Check if pump is locked by rust or foreign connection box is a warning for an objects. electrical hazard. c. Check if the ventilation of the location is Please make sure that the power has been bad for causing the overheating of motor.
Inlet / Outlet mm(in) 20(¾") 25(1") N.W. (kg) PARTS Part FIG.5 Motor Mechanical Seal Impeller Pump Casing Cover Screw Steel Ball Gasket Flange Check Valve Set Spring Water Cover Water Plug Pressure Tank Ø Pressure Switch WALRUS PUMP CO., LTD. Web: www.walruspump.com...