Related Manuals for Walrus TP8-P Series
Summary of Contents for Walrus TP8-P Series
- Page 1 TP8-P Series TP8-P Series Automatic Booster Pump Instruction Manual ISO 9001 Certi ed WALRUS PUMP CO., LTD.
- Page 2 Operation Conditions: 4. After the power switch on, the motor should turn immediately . After a few 1. Ambient temperature: Max. +40°C seconds, the water should be delivered . 2. Liquid temperature: +4°C ~ +40°C 5. If the water does not be delivered immedi- 3.
- Page 3 Electrical connection a. Check the electrical power source, fuse, and circuit breaker. This mark located outside the b. Check if pump is locked by rust or foreign connection box is a warning for an objects. electrical hazard. c. Check if the ventilation of the location is Please make sure that the power has been bad for causing the overheating of motor.
-
Page 4: Specifications
Inlet / Outlet mm(in) 20(¾") 25(1") N.W. (kg) PARTS Part FIG.5 Motor Mechanical Seal Impeller Pump Casing Cover Screw Steel Ball Gasket Flange Check Valve Set Spring Water Cover Water Plug Pressure Tank Ø Pressure Switch WALRUS PUMP CO., LTD. Web: www.walruspump.com...