Table of Contents
Advertisement
SIP-DECT Site Survey Kit User Guide
MEASUREMENTS
For accurate results, all measurements must be made in active call state. A connection between
the two DECT phones is established. The audio quality measurements support the site survey.
By default, the DECT phones are subscribed to both RFP SI and RFP SX (DECT base stations)
from the SIP-DECT Site Survey Kit. The DECT base stations are single cell with different PARK
codes. Handover between RFP SI and SX is not possible.
DISPLAY AND SOFTKEYS
Standard display in idle state
XQ mode
This key toggles the XQ to OFF/ON. Default is ON and XQ is controlled by the DECT base statoin.
DECT measure mode
All visible DECT base stations from subscribed networks and from alien DECT networks are
shown in a list.
Audio mode
Select between Standard Audio, Hi-Q audio, and Automatic mode.
8
Nr
= item number (ordered from high to low, by field strength)
dBm
= field strength
RFPI
= Radio Fixed Part Identifier (DECT base station identifier)
Stop
= stops measurement, freezes screen, enables scrolling
through a longer list
Start
= starts measurement again
Clear
= clears screen for new measurement
ESC
= quits DECT measure mode, returns to default
Hide quick links:
Advertisement
Table of Contents
