Preparing For The Next Measurement Session; Charging The Powerpack; Charging The Mitel 650 Dect Phone; Charging The Ipod - Mitel SIP-DECT Site Survey Kit User Manual

PREPARING FOR THE NEXT MEASUREMENT SESSION

In preparation for the next measurement session and to optimize battery life time, all components
should be fully charged. The Powerpack, Mitel 650 DECT phone and iPod should be switched
off before being packed into the carrying case.

CHARGING THE POWERPACK

CHARGING THE MITEL 650 DECT PHONE

• Charge the Mitel 650c in the charger.
• Wait until the Mitel 650c is fully charged.
• Ensure that the Mitel 650c is switched off before placing it in the carrying case.

CHARGING THE IPOD

• The iPod can be charged with the Lightning-USB cable as described in the Quick Guide.
• Ensure that the iPod is switched off before placing it in the carrying case.
• Charge the Powerpack only with the Ansmann ACS 310.
• Notice the LEDs on the charger.
• Wait until the Powerpack is fully charged (may need up to
6 hours).
• Ensure that the Powrpack is switched off before placing it in
the carrying case.
Setup
7