Specifications - Snapper 2400 XL Operator's Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide
array of products on which our engines are placed, and the variety of environmental issues applicable to operating
the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a
piece of power equipment (actual "on–site" power). This difference is due to a variety of factors including, but not lim-
ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max-
imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip-
ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion
chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted
based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match
ENGINE:
21 HP* Briggs & Stratton
Make Briggs & Stratton
Model Vanguard
Horsepower 21 @ 3600 rpm
Displacement 28.3 Cu. in (627 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 56 Oz. (1.4 L)
20 HP* Briggs & Stratton
Make Briggs & Stratton
Model Vanguard
Horsepower 20 @ 3600 rpm
Displacement 34.8 Cu. in (570 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 48 Oz. (1.4 L)
18 HP* Briggs & Stratton
Make Briggs & Stratton
Model Vanguard
Horsepower 18 @ 3600 rpm
Displacement 34.8 Cu. in (570 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 48 Oz. (1.4 L)
18 HP* Briggs & Stratton
Make Briggs & Stratton
Model Intek 406777
Horsepower 18 @ 3600 rpm
Displacement 40 Cu. in (656 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 230 CCA
Oil Capacity 1-7/8 qt. (1.9L)
CHASSIS:
Fuel Tank Cap. Capacity: 2.5 Gallons (9.5 L)
Rear Wheels Tire Size: 20 x 10 - 8
Inflation Pressure: 6-8 psi (,41-,55 bar)
Front Wheels Tire Size: 15 x 6.00-6
Inflation Press.: 15 psi (,8-1,0 bar)
the values derived using the foregoing codes.
35

Specifications

TRANSMISSION:
K46
Type Hydrostatic Tuff Torq K46
Hydraulic Fluid 10w 30 Premium Engine Oil
Capacity 2.6 qt (2,5 L)
Speeds Forward: 0-5.5 MPH (0-8,8 km/h)
@ 3400 rpm Reverse: 0-3.5 MPH (0-5,6 km/h)
Continuous Torque 215 ft. lbs. (291 N.m.)
Output
Drawbar Rating 440 lbs. (200 Kg)
Maximum Weight 584 lbs. (265 Kg)
on Axle
DIMENSIONS
Overall Length 109" (277 cm)
Length (Tractor Only) 76" (193 cm)
Overall Width 37" (94 cm)
Height At Top of Seat: 44" (112 cm)
Weight (approx.)
16HP Tractor 695 lbs. (318 kg)