SafetyRules & information Read theManual The operator's manual contains important safety information you need to be aware of BEFORE you operate your unit as well as DURING operation. Safe operating techniques, an explanation of the product's features and controls, and maintenance information is included to help you get the most out of your equipment investment.
Page 4
Meving This equipment has many moving parts that can injure you or someone else. However, if you are seated in the seat properly, and follow all the rules in this book, the unit is safe to operate. The mower deck has spinning mower blades that can amputate hands and feet. Do not allow anyone near the equipment while it is running! To help you, the operator, use this equipment safely, it is equipped with an operator-present...
Page 5
SafetyRuJes & lflfomatJofl Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating The triangle _, in text signifies important cautions or warnings which must be followed.
Page 6
SLOPE OPERATION Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you can- not back up the slope or if you feel uneasy on it, do not operate on it.
Page 7
SERVICE AND MAINTENANCE Safe Handling of Gasoline 1. Extinguish all cigarettes, cigars, pipes, and other sources of ignition. 2. Use only approved gasoline containers. 3. Never remove the gas cap or add fuel with the engine running. Allow the engine to cool before refueling. 4.
_ _icity Manufacturing, inc. When contacting your authorized dealer for replace- ment parts, service, or information you MUST have these numbers. Record your model name/number, manufacturer's fication numbers, and engine serial numbers in the space provided for easy access. These numbers can be found in the locations shown.
Safety Decals Safety Decals This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to...
Safety icons Warning: Read Operator's Manual. Read and understand the Operator's Manual before using this machine. Danger: Thrown Objects. This machine is capable of throwing objects and debris. Keep bystanders away. Warning: Remove Key Before Servicing. Remove the key and consult techni- cal literature before performing repairs or maintenance.
Features & Controls Control Functions The information below briefly describes the function of individual controls. require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERA TION section. Choke (Select lVlodels) Close the choke for cold starting.
Page 12
Attachment Lift Control Lever When using the mower deck, lift the deck off the ground while transporting to and from the job site. DO NOT cut with the mower in the raised, transport position. The attachment lift control lever raises and lowers attachments that utilize the tractor's hydraulic lift cylinder.
Features & Cefltrols Transmission Oil Level Check Plug Transmission oil check plug/dipstick is used to check transmission oil level and to add oil to the transmission. See TRANSMISSION MAINTENANCE for oil level check and fill procedures. Mid / Rear PTO Selector The mid / rear PTO selector lever selects which PTO or combination of PTOs is activated by the PTO switch.
Dashboard Display Functions The dashboard display shows a variety of engine opera- tion and control status information, as explained in the descriptions below. A. Irregular Voltage Indicates that the voltage being produced by the charg- ing system and battery is higher or lower than normal levels.
OperatJflg theTractor General Operating Safety Be sure to read all information in the Safety and Operation sections before attempting to operate this unit. Become familiar with all of the controls and how to stop the unit. Slope Operation WARNING Never operate on slopes greater than 17.6 percent (10 °) which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.
1. Return the ground speed control(s) to neutral and engage the parking brake. 2. Disengage the PTO and wait for all moving parts to stop. 3. Place the throttle control in the position specified in the engine owner's manual provided in the operator's packet shipped with your tractor.
Operatiflg t heTractor Pushing The Tractor By Hand DO NOT TOW TRACTOR cause Towing the unit will transmission Do not use another vehicle to push or pull this unit. Do not actuate the transmission valve lever while the engine is running. 1.
Page 18
Figure 7. Auxiliary Hydraulics A. Angle Left B. Angle Right Using Auxiliary Hydraulics The attachment lift control is also used to control attach- ments that use the tractor's auxiliary hydraulic couplers located on the right and left front frame rails. The left set of quick couplers is activated when the front / rear hydraulic switch is turned to the FRONT position (this disables the inboard hydraulic cylinder).
OperatJflg theTractor Optional 3-Point Hitch Operation (Select Models) Attachment Weight Limit The maximum alJowable attachment weight is deter- mined by the gross weight of the attachment verses the distance from the end of the tractor hitch arm to the attachment's center of gravity (Figure 10). The further an attachment's center of gravity is from the tractor, the more leverage is required to raise it.
Page 20
Figure 12. Install Sway Arms A. Sway Arms B. Hair Pin Clips C. Clevis Pins D. Upper Link Assembly E. Safety Clips F. Clevis Pins Hitch Arms Installation 1. Attach the upper lift link (D, Figure 12) to the hitch using a clevis pin (F) and safety clip (E).
Operatiflg t heTractor 540 Rear PTO Operation (Select Models) Checks Before Starting Refer to the Maintenance & Adjustments sections of this manual and perform any needed service. Connecting a Drive Shaft 1. Disengage the PTO, set the parking brake, stop the engine, and wait for all moving parts to stop.
Page 22
540 Attachment Recommendations GENERAL This rear PTO was designed and tested with the 540 RPM rear tiller sold by Simplicity Manufacturing. are a wide variety of other 540 attachments available from numerous manufacturers. It is impossible for us to test every one of them. There are a few basic, common- sense criteria that can be used to determine whether these attachments are suitable for use with your tractor.
Operatiflg t heTractor Mower Deck Removal & installation NOTE: Perform mower removal and installation on a hard, level surface such as a concrete floor. Removing the Mower Deck WARNING Engage parking brake, disengage engine and remove key before attempting install or remove the mower. 1.
Page 24
installing the Mower Deck 1. Slide the mower under the tractor. 2. Hook up the electrical connection (Figure 20). 3. Start the engine. 4. Set the cutting height to maximum. 5. Fully lower the attachment lift. 6. Shut off the engine and wait for all moving parts to stop.
Operatiflg t heTractor Attaching a Trailer The maximum weight of a towed trailer should be less than 800 Ibs (363 kg). Secure the trailer with an appro- priately sized clevis pin (A, Figure 23) and clip (B). Excessive towed loads can cause loss of traction and loss of control on slopes.
MAINTENANCE SCHEDULE The following schedule should be followed for normal care of your tractor and mower. SAFETY iTEMS Check Safety Interlock System Check Tractor Brakes Check Mower Blade Stopping Time TRACTOR MAINTENANCE Check Tractor/Mower for Loose Hardware Clean Debris Out of Engine Compartment Clean Radiator ** Clean Transmission Oil Cooler Check Transmission Oil Level...
RegWPMaiflteflaflce Engine Maintenance - General Refer to the engine owner's manual for all engine main- tenance procedures and recommendations. Clean Debris Out of Engine Compartment Service interval: Every 25 Hours, or As Necessary Stop the engine and allow the unit to cool. Remove all debris from the engine compartment.
Drain Fuel Separator Service Interval: Seasonally or as Needed The fuel filter assembly has a built in water separator that should be drained when the indicator light in the dashboard display turns on or once per season. Replace the fuel filter element every 800 hours of opera- tion or as required.
RegWPMaiflteflaflce Check Transmission Oil Level ® Do not allow dirt, water, or other debris to enter the expansion chamber or transmission. Even a small amount of dirt can damage the transmission Service Interval: Every 25 Hours Oil Type: Type F Automatic Transmission 1.
Change Transmission Oil & filter Service Interval: After first the 50 hours, then every 250 ® Do not allow dirt, water, or other debris to enter the expansion chamber or transmission. Even a small amount of dirt can damage the transmission hours.
RegWPMaiflteflaflce Check Mower Deck Gear Box Oil Service Interval: Every Fall & Spring To check the mower deck gear box oil: 1. Place a shop towel under the side opening to keep oil off the belt and pulleys. 2. Remove the side level plug (B, Figure 31) of the gear box.
Check Tire Pressures Service interval: Every 25 Hours Tire pressure should be checked periodically, and main- tained at the levels shown in the chart. Note that these pressures may differ slightly from the "Max Inflation" stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life.
RegWPMaiflteflaflce Lubrication Service interval: Every 25 Hours Lubricate the unit at the locations shown in Figures 31- 37 as well as the lubrication points listed. Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys.
Page 34
Grease the Electric Lift Rod Grease Fitting Yearly Figure 35. Deck Lubrication Figure 36. Mower Arbor Lubrication ® ® Figure 37. Mower Drive Shaft RegularMaintenance Grease the Deck BeJt IdJer PuJley Arm Grease Fitting YearJy Every 10 Hours...
RegWPMaiflteflaflce Servicing The Mower Blades 1. Remove mower from the tractor. See Mower installation & Removal. WARNING For your personal safety, do not handle the sharp mower blades with bare hands. improper handling of blades may result in serious injury. 2.
Troubleshooting, Adjustment, & Service TROUBLESHOOTING While normal care and regular maintenance will extend the life of your equipment, prolonged or constant use may eventually require that service be performed to allow it to continue operating properly. The troubleshooting guide below lists the most common problems, their causes, and remedies.
Tractor Troubleshooting Cont. Brake will not hold. Tractor steers hard or handles poorly. TROUBLESHOOTING PROBLEM Mower will not raise. Mower cut is uneven. Mower cut is rough looking. Engine stalls easily with mower engaged. Excessive mower vibration. Excessive belt wear or breakage. Mower drive belt slips or fails to drive.
TrouhJeshooti&q, Adjustment, & Service Seat Adjustment Seat Slide Adjustment The seat can be adjusted forward and back. Move the lever (A, Figure 41), position the seat as desired, and release the lever to lock the seat into position. Brake Adjustment 1.
Headlight Replacement 1. Open the hood. 2. Remove the forward heat shield. 3. Remove the light bulb socket from the bezel by twist- ing it counterclockwise and pulling it out. 4. Use a rag or gloves to remove and replace the light bulb with an identical halogen bulb.
TroubJeshooti&|j, Adjustment, & Service Mower Adjustments & CAUTION DO NOT remove the mower deck baffles. The baffles help prevent grass clippings from becoming airborne and plugging up the engine cooling fins. Gauge Wheel Adjustment The mower gauge wheels can be placed in two positions depending on the height of cut.
Leveling The Mower If the cut is uneven, the mower may need leveling. NOTE: Unequal or improper tire pressure may also cause an uneven cut. SIDE TO SIDE LEVELING 1. With the mower installed, place the tractor on a smooth, level surface such as a concrete floor. Turn the front wheels straight forward.
TpouhJeshootin9o Adjustment, & Service BELTS OVER PULLEYS. o avoid damaging belts, DO NOT PRY Mower Belt Replacement Mower Drive Belt Replacement 1. Remove the mower deck. See Mower Removal and Installation 2. Remove the screws securing the belt covers and remove the belt covers.
NOTE: Specifications are correct at time of printing and are subject to change without notice. ENGINE: 27 HP* Briggs & Stratton Make Briggs & Stratton Model DM 950 D - Model 582447 Horsepower 27 @ 3600 rpm Displacement 58.1 cu in (952cc) Electrical System 12 Volt, 40 amp.
Accessories Replacement Parts Replacement parts are available from your authorized dealer. Always use genuine Simplicity Service Parts. Maintenance items Many convenient and helpful service and maintenance items are available from you authorized dealer. Some of these items include: Tire Sealant Engine Oil Touch-Up Paint Degrimer/Degreaser...