Features & Controls; Control Functions - Snapper 2400 XL Operator's Manual

Features & Controls
Figure 1. Tractor and
Mower Controls
NOTE: Steering wheel
removed for clarity
Please take a moment and
familiarize yourself with
the name, location, and
function of these controls
so that you will better
understand the safety and
operating instructions pro-
vided in this manual.

CONTROL FUNCTIONS

The information below briefly describes the func-
tion of individual controls. Starting, stopping, dri-
ving, and mowing require the combined use of sev-
eral controls applied in specific sequences. To
learn what combination and sequence of controls
to use for various tasks see the OPERATION sec-
tion.
Throttle/Choke Control
(Single Lever Models)
The throttle/choke lever controls engine speed and
choke. Move the throttle forward to increase engine
speed and back to decrease engine speed. Always
operate at FULL throttle. Move the control fully forward
(past the detent) to close the choke. Close the choke for
cold starting. Open the choke once the engine starts. A
warm engine may not require choking.
Throttle Control
The throttle controls engine speed. Move the throttle for-
ward to increase engine speed and back to decrease
engine speed. Always operate at FULL throttle.
12V
Close the choke for cold starting. Open the choke once
the engine starts. A warm engine may not require chok-
ing. Move the lever forward to close the choke.
The light switch turns the tractor headlights on and off.
The hour meter registers hours of use.
Depressing the brake pedal applies the tractor brake.
10
Choke
Headlights
Hour Meter (Optional)
Brake Pedal