Table of Contents

Advertisement

Available languages

Available languages

24 www.electrolux.com
Programme
P3
FlexiWash
50º-65º
P4
70º
P5
P6
Rinse &
Hold
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 MyFavourite
With this option you can set and memo-
rise your favourite programme and op-
tions.
It is not possible to memorise the options
Multitab and Delay with MyFavourite.
The default programme for this
option is P2.
How to memorise a programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
1)
Duration
(min)
130 - 140
150 - 160
30
14
Energy
(kWh)
1.3 - 1.5
1.4 - 1.6
0.8
0.1
ance is in setting mode, refer to 'SET-
TING AND STARTING A PRO-
GRAMME'.
2. Set the programme and the options
that you want to memorise.
3. To memorise the programme, press
and hold the MyFavourite button for
a few seconds.
You can only memorise one programme.
If you memorise a new programme, the
previous one is cancelled.
5.2 TimeSaver
This option increases the water pressure,
the result is that the programme duration
decreases by approximately 50%.
To make sure that the washing results are
the same as with the normal programme
duration, the temperature of the water in-
creases. This increases the energy con-
sumption.
With a shorter drying phase also the dry-
ing results can decrease.
Water
(l)
14 - 15
13 - 15
9
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esl 6601

Table of Contents