Kyocera iBurst UTC User Manual page 6

------- Warning Warning -------- --------
Warning Warning -------- --------
(If used improperly, may cause disability or physical damage.)
Do not give a shock strong against the product, such as dropping and throwing. It becomes
•
the cause of failure. Moreover, do not ride on the product. It may become the cause of an
injury.
Do not put the product under direct sunshine or near equipment with high temperature
•
such as a stove and a heater. It may raise the temperature of the interior and cause fire.
Do not put the product at places with an extreme fluctuation of temperature, such as near
•
the air conditioner or a heater. The dew condensation may occur in the interior and cause
fire, electrical shock, and malfunction.
Do not put the product at places with oil and steams such as in the kitchen. In addition, do
•
not put it at dusty places and places where metal powder and toxic gas occur. It may cause
fire or electric shock.
Do not place the product on unstable places such as on an unsteady desk or slanted
•
surfaces. In addition, do not put any object on the product. It may loose balance and tumble,
or fall and cause injury.
When the thunder occurs in near, do not use the product and its peripheral equipment. It
•
may become the cause of an electric shock.
Do not touch the connector pins directly with your hands. Static electricity may affect the
•
components. As static electricity is created from both the cloth and the human body, before
putting or removing the product, release static electricity by touching a metal object such
as a small cabinet.
Do not use it in the intense place of vibration. It becomes the cause of failure.
•
Kyocera Corporation
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
- 6 -
Revision 1.01 --- June.08.2006