Kyocera iBurst UTC User Manual page 38

9. Click the [Finish] button.
10. Plug the iBurst Modem into a PC card slot of your PC.
Windows will detect the iBurst Modem as a new hardware so that [Add New Hardware
Wizard] will begin.
11. Confirm the device name indicated shall be [iBurst Modem] or [iBurst Modem Type 02-01].
Click the [Next >] button.
The device name detected shall be;
"Kyocera Corporation-iBurst Modem" or
"Kyocera Corporation-iBurst Modem Type 02-01".
Kyocera Corporation
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
iBurst Modem Card Model (UTC) Manual iBurst Modem Card Model (UTC) Manual
- 38 -
Revision 1.01 --- June.08.2006